ABS Hyper Speed V2 Natural Raise3D - 1.75mm - 1kg

Ref. [S]5.11.19068A01

The Raise3D ABS Hyper Speed V2 Natural filament is a material specially developed for high-speed printing compatible with the Hyper Speed Upgrade Kit in combination with the Pro3 and Pro3 Plus.

  • Reduced risk of clogging
  • Printable at high speed without loss of mechanical properties
  • Heat resistance up to 77°C (higher than standard ABS)

This V2 further improves the fluidity and mechanical efficiency of your prints. It is possible to print this filament up to 300mm/s.

€35.70 excl. VAT
Out of stock Free shipping

From 2, only €34.63 / unit. 3%

From 5, only €33.92 / unit. 5%

From 10, only €32.84 / unit. 8%

You may also like it

Buy essential add-ons to use with this product

Polydryer Polymaker
Polydryer Polymaker

€74.92 excl. VAT

Dimafix Spray - 400 ml - Bed Adhesive
Dimafix Spray - 400 ml - Bed Adhesive

€11.66 excl. VAT

Get an instant quote

Our experts are at your service to answer your questions and provide advice at info@polyfab3d.com.

Delivery within 48/72 hours

Order before 1pm. Same day shipping

Free delivery

Free delivery near you from €69.90

Premium support

Our teams are on hand to answer all your questions

Over 3500 products

A wide choice of products from the biggest brands

Raise3D ABS Hyper Speed V2 Natural 

Designed to overcome the challenges encountered with traditional ABS filaments during fast prints, the Hyper Speed ABS V2 filament reduces the risk of nozzle clogging and uneven layer adhesion, often caused by the rapid transition from solid to melted state.

Compared to previous versions, this innovative filament offers a higher molecular weight and improved stiffness, allowing printing speeds up to 300 mm/s.

Our usage recommendations with ABS Natural Hyper Speed filament

The Raise3D ABS Hyper Speed V2 is compatible with all open 3D printers on the market in 1.75mm diameter. To get the most out of this high-speed material, it has been developed and designed to integrate perfectly with the Pro3 and Pro3 Plus series of the brand thanks to the upgrade kit.

We recommend setting your printer to an extrusion temperature between 210 and 260°C to print Raise3D ABS Hyper Speed V2 under optimal conditions.

Printing speeds between 25 and 300mm/s and using a heated bed between 55 and 65°C are also recommended. Additionally, ABS can be prone to warping and layer delamination during high-speed printing without a heated chamber.

  • 🎯 We collaborate with businesses.
  • 📦 Stock in Europe
  • 🚚 Ships within 24 hours
  • 🔐 Secure payments
  • 🔙 14 days to change your deww
  • 📱 Need advices ? Contact technical support

A question? Need help? Contact us, it's a pleasure to help you.

✉️ Contact us

Our team is available from Monday to Friday, from 10 am to 12 pm and from 2 pm to 5 pm.

Specifications for ABS Hyper Speed V2 Natural Raise3D - 1.75mm - 1kg

Technology / Product

Technology
FDM
Material
ABS
Bio-based
No
Diameter
1.75 mm
Sensitivity to humidity
Low
Application
Aesthetics, Prototyping, Production, Large format
Odour
Yes
Harmful
Yes
Level of difficulty
Intermediate
Type of product
3D Filament
Colour
Natural
Net weight
1 kg

Technical values

Deflection temperature under load (0.45 MPa)
73 °C
Charpy
7 kJ/m² of energy
Tensile modulus
2600
Flexural modulus
1990 Mpa
Maximum elongation at break
47 %
Density
1.08 g/cm3

Extrusion

Nozzle type
Brass
Type of consumable
Non-proprietary filament (open system)
Min. plateau temperature
50 °C
Max. tray temperature
60 °C
Min. extrusion temperature
210 °C
Max. extrusion temperature
240 °C
Min. speed
40 mm/s
Max. speed
300 mm/s
Minimum nozzle diameter
0.2 mm
Bowden compatibility
Yes

Specific equipment

Closed printing enclosure
No
Filtration
Without

Installation / Prerequisites

Packaging size
230 x 210 x 80 mm
Packaging weight
1.4 Kg
Type
Filament on spool
Box supplied
Yes
Coil material
Cardboard

Customer reviews about ABS Hyper Speed V2 Natural Raise3D - 1.75mm - 1kg

Recommanded products

Product added to wishlist