SUNLU FilaDryer S4

SUNLU FilaDryer S4

The SUNLU FilaDryer S4 can hold up to 4 spools of 1kg filaments. What's more, it is equipped with eight filament holes and PTFE tubes, which meets users' requirements for drying several filaments and printing simultaneously when drying with several printers.

FilaDryer S4 highlights

Large capacity: Internal size 450 x 210 x 211 mm, can dry 4 rolls of 1 kg consumables at the same time, to meet the user's multicolour printing and multi-computer printing needs.

Fast heating: Built-in 300W PTC heating resistor, heating to 50℃ in 30 minutes, faster and more efficient.

3safety protection levels: PTC (Positive Temperature Coefficient) resistor, temperature switch and triple software protection, real-time temperature monitoring and abnormal temperature alarm notifications, for enhanced safety.

Temperature balance: The circular fans on the left and right sides and the lower heating fan in the chassis ensure that the temperature in the chassis is balanced at ±3℃, and every part of the consumables can achieve a perfect drying effect.

Adjustable humidity: Set the humidity in the chassis, automatic start when the humidity in the box reaches the set value (30%-50%) automatically stop when the humidity drops to 25%, to better meet the humidity needs of different types of consumables.

High compatibility: Support all models of connected printers; support printing materials with 4 printers at the same time; compatible with filament yarn diameter of 1.75 mm, 2.85 mm, 3.0 mm.