At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
The Bambu Lab AMS Lite is an automatic material loading system.
It allows the automated printing of multiple colors and materials, with improved spool compatibility and filament identification via RFID.
Compatible with Bambu Lab A1 and A1 Mini.
Our experts are at your service to answer your questions and provide advice at info@polyfab3d.com.
Delivery within 48/72 hours
Order before 1pm. Same day shipping
Free delivery
Free delivery near you from €69.90
Premium support
Our teams are on hand to answer all your questions
Over 3500 products
A wide choice of products from the biggest brands
The Bambu Lab AMS Lite is an innovative automatic material management system, specifically designed for Bambu Lab A1 3D printers.
It offers users the ability to print with multiple colors and materials without manual intervention, thus expanding creative possibilities and simplifying the printing process.
With advanced features such as automatic filament monitoring, extended compatibility with various spools, and RFID material identification, the AMS Lite ensures a smooth and efficient printing experience.
Its design makes maintenance and process monitoring easier, making this accessory a valuable asset for any user looking to optimize their 3D prints.
Multicolor and Multi-Material Printing: The AMS Lite allows for automated printing with multiple colors and materials, providing greater creative flexibility for your 3D printing projects.
Automatic Filament Monitoring: The system continuously monitors filament consumption and automatically switches to a new spool when the current spool is empty, preventing interruptions during the printing process.
Improved Spool Compatibility: With a spring-loaded rotating spool holder that firmly grabs the spool at the center, the AMS Lite supports a wide variety of filament spools, including cardboard spools, offering more flexibility in material choice.
Filament Identification via RFID: Bambu Lab filaments equipped with an RFID chip automatically transmit material information to the printer, allowing the application of the best print settings for the given material.
Ease of Maintenance: The AMS Lite's design allows users to easily monitor its operation, making cleaning and maintenance easier to prevent potential failures.
Material Compatibility: PLA, PETG, ASA, PET, PA, PC, PVA, BVOH, PP, POM, HIPS, and PLA-CF / PAHT-CF Bambu Lab (1.75mm diameter).
The Bambu Lab AMS Lite is a valuable addition for Bambu Lab A1 series users, offering automated and efficient material management.
Its advanced features, such as multicolor printing, automatic filament monitoring, and extended spool compatibility, simplify the printing process and expand creative possibilities. The AMS Lite optimizes your workflow and ensures high-quality prints with minimal intervention.
A question? Need help? Contact us, it's a pleasure to help you.
Our team is available from Monday to Friday, from 10 am to 12 pm and from 2 pm to 5 pm.
Specifications for Bambu Lab AMS Lite (Automatic Material System)
Technology / Product
Extrusion
Spare part
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
Save products to your wishlist to buy them later or share them with friends.
