At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
This ACF film offers the possibility to accelerate printing up to three times, thereby improving the efficiency and productivity of the printing process. It features a 92% UV light transmission, contributing to faster and more precise polymerization of your 3D printed models to achieve a smooth surface.
Original manufacturer part.
Compatible only with the Elegoo Saturn 3 Ultra and Saturn 3.
Our experts are at your service to answer your questions and provide advice at info@polyfab3d.com.
Delivery within 48/72 hours
Order before 1pm. Same day shipping
Free delivery
Free delivery near you from €69.90
Premium support
Our teams are on hand to answer all your questions
Over 3500 products
A wide choice of products from the biggest brands
Compatible only with the Elegoo Saturn 3 Ultra 3D printer and Saturn 3.
Film dimensions: 290 x 195mm; Film thickness: 0.3mm.
The ACF release film is manufactured with composite technology, preventing it from sticking to the LCD screen and affecting the release effect. It is identifiable by a frosted side and a smooth side, with the frosted side oriented toward the LCD screen.
This film is highly resistant to chemicals, wear-resistant, and UV stable, ensuring it can withstand prolonged exposure to the UV light source without deteriorating.
The total thickness of 0.3 mm prevents it from breaking during the printing process, ensuring durability to withstand daily use while maintaining its quality over time.
The non-stick surface, with reduced release tension, is free from wrinkles, scratches, and bubbles, ensuring your 3D printed models detach easily from the film without adhesion issues.
This ACF film allows printing to be 3 times faster, making the printing process more efficient and productive. With a 92% UV light transmission, it ensures faster and more precise polymerization of your 3D printed models for a smooth surface.
Order contents
A question? Need help? Contact us, it's a pleasure to help you.
Our team is available from Monday to Friday, from 10 am to 12 pm and from 2 pm to 5 pm.
Specifications for Set of 5 ACF films, Elegoo Saturn 3, Saturn 3 Ultra
Technology / Product
Spare part
Compliant article
Replacement
Simple handling and assembly of the film.
Good packaging received in very good condition! already used a film and perfect with a good setup on the tray!
I have not yet used but very well packed and fast shipping.
Perfect Fep acf official for Saturn 3 ultra
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
Save products to your wishlist to buy them later or share them with friends.
