At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
High-capacity spool holder kit compatible with 3 kg and 5 kg spools for Elegoo OrangeStorm Giga, with filament detector and guide.
Robust metal structure and dual-bearing rollers for smooth feeding.
Our experts are at your service to answer your questions and provide advice at info@polyfab3d.com.
Delivery within 48/72 hours
Order before 1pm. Same day shipping
Free delivery
Free delivery near you from €69.90
Premium support
Our teams are on hand to answer all your questions
Over 3500 products
A wide choice of products from the biggest brands
Optimize your 3D prints with this high-capacity spool holder kit designed to easily accommodate 3 kg and 5 kg spools (252 × 174 × 75 mm). It includes a sturdy 2 mm metal support, a filament detector, and a filament guide for consistent and smooth filament feeding.
Thanks to its dual-bearing roller system, this holder reduces friction and allows seamless feeding, even with heavy spools. Easy to install, this kit reduces filament change interruptions and ensures high-quality, accurate prints.
A question? Need help? Contact us, it's a pleasure to help you.
Our team is available from Monday to Friday, from 10 am to 12 pm and from 2 pm to 5 pm.
Specifications for 5kg Spool holder kit, Elegoo OrangeStorm Giga
Technology / Product
Spare part
Product conforms, speed of shipping!
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
Save products to your wishlist to buy them later or share them with friends.
