PolySupport Blanc perle - 1.75mm - 750 g
PolySupport Blanc perle - 1.75mm - 750 g (2)
PolySupport Blanc perle - 1.75mm - 750 g (3)
PolySupport Blanc perle - 1.75mm - 750 g (4)
PolySupport Blanc perle - 1.75mm - 750 g (5)
PolySupport Blanc perle - 1.75mm - 750 g
PolySupport Blanc perle - 1.75mm - 750 g (2)
PolySupport Blanc perle - 1.75mm - 750 g (3)
PolySupport Blanc perle - 1.75mm - 750 g (4)
PolySupport Blanc perle - 1.75mm - 750 g (5)

PolySupport Pearl White - 1.75mm - 750 g

Ref. PD04001
4.0/5

The Polymaker PolySupport Pearl White filament is a material mainly used in dual extrusion and can be removed by hand very easily without the need for any chemicals.

🔖 Special offer

-15.00% instant discount with the code : POLY15

€40.95 excl. VAT
In Stock Free shipping

💰 Your purchases with 0% tax!

Get an instant quote

Our experts are at your service to answer your questions and provide advice at info@polyfab3d.com.

Delivery within 48/72 hours

Order before 1pm. Same day shipping

Free delivery

Free delivery near you from €69.90

Premium support

Our teams are on hand to answer all your questions

Over 3500 products

A wide choice of products from the biggest brands

Using PolySupport Pearl White

The PolySupport™ 3D filament from Polymaker is a material used as a complement to the main build material. This filament has the advantage of allowing support structures to be removed by hand and does not require any chemicals or water compared to PVA and/or BVOH.

PolySupport can be used on single or dual extrusion printers, either as a support material to complement the main filament (dual extrusion), or as both object and support material. In both cases, the support structure is easily removed after printing.

PolySupport: Key Advantages

Excellent alternative to soluble supports: PolySupport™ is easy to print and store. The material is moisture- and heat-resistant and does not require any hazardous chemicals (solvents) to dissolve.

Non-toxic: Previously, soluble materials were recommended to print complex geometry parts.

Our Recommendations for Using PolySupport

Polymaker PolySupport filament prints at an extrusion temperature between 220 and 230°C and a bed temperature between 25 and 60°C, with a recommended speed of 20 to 40mm/s. Using a BuildTak, glue, or tape is recommended to improve bed adhesion.

  • 🎯 We collaborate with businesses.
  • 📦 Stock in Europe
  • 🚚 Ships within 24 hours
  • 🔐 Secure payments
  • 🔙 14 days to change your deww
  • 📱 Need advices ? Contact technical support

A question? Need help? Contact us, it's a pleasure to help you.

✉️ Contact us

Our team is available from Monday to Friday, from 10 am to 12 pm and from 2 pm to 5 pm.

Specifications for PolySupport Pearl White - 1.75mm - 750 g

Technology / Product

Technology
FDM
Material
Support
Visual Appearance
Opaque
Diameter
1.75 mm
Sensitivity to humidity
Strong
Odour
Yes
Harmful
Yes
Level of difficulty
Novice
Brand
Polymaker
Type of product
3D Filament
Colour
White
Net weight
750 g

Technical values

Specific properties
Support
Density
1.2 g/cm3

Extrusion

Nozzle type
Brass
Type of consumable
Non-proprietary filament (open system)
Min. plateau temperature
0 °C
Max. tray temperature
60 °C
Min. extrusion temperature
220 °C
Max. extrusion temperature
230 °C
Min. speed
20 mm/s
Max. speed
40 mm/s
Minimum nozzle diameter
0.4 mm
Bowden compatibility
Yes
Warping sensitivity
Low
Material Loader
Bambu Lab AMS, Anycubic ACE, Creality CFS, Bambu Lab AMS HT, Bambu Lab AMS Lite, Bambu Lab AMS 2 Pro, Anycubic ACE 2 Pro

Specific equipment

Closed printing enclosure
No
Filtration
HEPA, Coal

Installation / Prerequisites

Type
Filament on spool
Box supplied
Yes
Coil material
Plastic

Customer reviews about PolySupport Pearl White - 1.75mm - 750 g

★★★★★ 5/5
✓ Avis vérifié

Good

Avis du 31/03/2026 par laurent H.
★★★★★ 4/5
✓ Avis vérifié

good

Avis du 16/11/2023 par A A.
★★★★★ 3/5
✓ Avis vérifié

A little expensive... to see in time if it really brings the service expected

Avis du 10/11/2022 par A A.

Questions des clients

Vous ne trouvez pas la réponse à votre question ?

Product added to wishlist