PETG-CF Titan Gray Bambu Lab - 1.75 mm - 1 kg

Ref. G50-D6-1.75-1000-spl

Bambu PETG-CF is a composite material made from PETG and carbon fibres.

Less clumping and spinning
Top-quality printing surface
Improved mechanical properties and high flexibility
Supplied with a reusable base spool

€39.31 ^{excl. VAT}

Out of stock Free shipping

More options

PETG-CF Black Bambu Lab - 1.75 mm - 1 kg

PETG-CF Titan Gray Bambu Lab - 1.75 mm - 1 kg

PETG-CF Purple Violet Bambu Lab - 1.75 mm - 1 kg

PETG-CF Malachite Green Bambu Lab - 1.75 mm - 1 kg

PETG-CF Indigo Blue Bambu Lab - 1.75 mm - 1 kg

PETG-CF Brick Red Bambu Lab - 1.75 mm - 1 kg

From 2, only €38.13 / unit. 3%

From 5, only €37.34 / unit. 5%

From 10, only €36.17 / unit. 8%

Quantity

PETG-CF Bambu Lab - 1.75 mm - 1 kg

Bambu PETG-CF Titan Gray is a composite material made from PETG and carbon fibre. The new formula has significantly improved print quality by reducing nozzle clogging and lump formation compared with traditional PETG. Thanks to the addition of carbon fibre, Bambu PETG-CF offers greater resistance while retaining good strength and a glossy appearance. It is an ideal material for drone parts, racing models and various functional parts that require both high performance, particularly in terms of impact resistance, and an elegant appearance.

PETG-CF Titan Gray Bambu Lab key benefits

Less clumping and stringing: Bambu PETG-CF is improved thanks to a modified formula that specifically addresses the problem of clumping and sticking to the nozzle when printing PETG.

Top-of-the-range printing surface: Carbon fibre provides an advanced texture to the printing surface, while retaining the gloss of PETG itself.

Carbon fibre texture: Carbon fibre provides a soft reflection, minimal layer lines and a unique delicate texture.

RFID for intelligent printing: All printing parameters are integrated into the RFID chip, which can be read via our AMS (Automatic Material System) system. Load and print! No more tedious setting up.

Our recommendations for use with Bambu Lab PETG-CF

The spool of PETG-CF is fitted with an RFID chip that enables automatic detection of the filament by the AMS (Automatic Material System) system.

All the printing parameters are stored in this chip beforehand, which improves productivity. Bambu Lab recommends printing PETG-CF with an extrusion temperature of between 240 and 270°C, a platen temperature (with adhesive) of between 65 and 75°C, and a maximum print speed of 200 mm/s.

🎯 We collaborate with businesses.
📦 Stock in Europe
🚚 Ships within 24 hours
🔐 Secure payments
🔙 14 days to change your deww
📱 Need advices ? Contact technical support

TDS - PETG-CF Bambu Lab 210.95k

SDS - PETG-CF Bambu Lab 427.05k

Specifications for PETG-CF Titan Gray Bambu Lab - 1.75 mm - 1 kg

Technology / Product

Technology: FDM
Material: PETG
Visual Appearance: Mat
Sensitivity to humidity: Low
Application: Production, Functional part, Extreme
Odour: Yes
Harmful: Yes
Brand: Bambu Lab
Type of product: 3D Filament
Colour: Grey
Net weight: 1 kg

Extrusion

Filament diameter: 1.75 mm
Nozzle type: Tempered steel
Type of consumable: Proprietary filament
Min. plateau temperature: 65 °C
Max. tray temperature: 75 °C
Min. extrusion temperature: 240 °C
Max. extrusion temperature: 270 °C
Max. speed: 200 mm/s
Minimum nozzle diameter: 0.4 mm
Warping sensitivity: Low
AMS compatible: Yes

Specific equipment

Closed printing enclosure: No
Filtration: Yes

Installation / Prerequisites

Type: Filament on spool
Box supplied: Yes
Coil material: Plastic

Spare part

Compatible printers: Bambu Lab X1 Carbon Combo, Bambu Lab X1 Carbon, Bambu Lab AMS, Bambu Lab P1P, Bambu Lab P1S, Bambu Lab X1E, Bambu Lab A1 Mini, Bambu Lab A1 Mini Combo