At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
At the moment satisfied, good interface, quality of printing, not a failed impression or with default on about 40 impressions, has to see over time reliability and precision because a lot of sensors and moving parts, the only negative points for my use of Ethernet port only of wifi which is when even quite sorry this economy given the price of the machine, I find very long the sequence of calibration, test ... at the start of printing.
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
The UltiMaker Print Core CC+ offers a 2.5x higher flow rate thanks to its four-chamber design. Equipped with a hardened steel nozzle, it ensures fast and precise printing with high-strength abrasive composite materials.
Official spare part compatible with UltiMaker S8 and Ultimaker S6.
Our experts are at your service to answer your questions and provide advice at info@polyfab3d.com.
Delivery within 48/72 hours
Order before 1pm. Same day shipping
Free delivery
Free delivery near you from €69.90
Premium support
Our teams are on hand to answer all your questions
Over 3500 products
A wide choice of products from the biggest brands
The exclusive Print Core+ CC for the UltiMaker S8 and the Ultimaker S6 features an innovative four-chamber design, enabling up to 2.5 times higher flow and better pressure regulation in the print head, ensuring cleaner and more precise prints.
Optimized for high-strength abrasive composite materials, these print cores offer increased durability and improved material flow. Their hardened steel nozzle provides consistent performance, even with the most demanding materials.
With an optimized melting zone, the CC+ print cores allow for rapid material deposition with a flow rate reaching 35 mm³/s, ensuring high-quality prints while reducing printing time.
Thanks to the quick-swap design, the UltiMaker Print Core CC+ 0.60mm can be changed quickly and easily without tools, increasing efficiency and reducing downtime. Additionally, an EEPROM chip stores the nozzle size and type, reducing errors and improving print success.
A question? Need help? Contact us, it's a pleasure to help you.
Our team is available from Monday to Friday, from 10 am to 12 pm and from 2 pm to 5 pm.
Specifications for UltiMaker Print Core CC+ 0.60mm
Technology / Product
Extrusion
Spare part
Aucun avis ne correspond à votre recherche.
Aucune question publiée pour ce produit.
Vous ne trouvez pas la réponse à votre question ?
Save products to your wishlist to buy them later or share them with friends.
