10K White Resin Forshape Premium - 5Kg

Using Forshape 10K White Resin 5Kg

The Forshape 10K White Resin is a high-quality yet economical 3D printing resin. This resin has been specially developed for use with DLP and LCD light sources at 385 and 405nm. It offers excellent technical and aesthetic properties for an economical resin.

The quality and composition of the Forshape 10K White Resin allow for prints with a very high level of detail, low shrinkage, and minimal odor. It is compatible with 4K/10K/16K printers, delivering precise models with fine details and a smooth finish.

Forshape 10K White Resin Premium 5Kg: Key Features

Very high level of detail: The 10K resin features low shrinkage, high dimensional stability, and excellent precision. Using high-resolution printers with this resin will yield prints with outstanding resolution and incredible details.

High compatibility: The 10K resin is highly compatible with most LCD and DLP 3D printers with wavelengths between 385 and 405nm. It is ideal for printing miniatures, models, and home 3D printing projects.

Fast curing: Thanks to optimized formulation, the UV resin offers better flow than standard resins, allowing fast and effective solidification during printing.

Low odor: The composition of this 10K resin ensures a light odor, limiting irritating fumes during printing. It is also REACH and RoHS certified, guaranteeing quality and safety.

Usage Recommendations with Forshape 10K Resin 5Kg

For LCD printers with monochrome screens, the base layer exposure time is 20 to 30 seconds and the exposure time per layer is 2 to 3 seconds.

Simply adjust the exposure times according to the desired layer height, leaving the rest as is.

Cleaning Forshape 10K White Resin 5Kg

Place the printed part in the washing tank of your post-processing station and fill the tank with 99.9% Isopropanol Alcohol (minimum 95% alcohol). Clean the part for a few minutes, then rinse with water before drying. Ensure the part is completely dry, as residual alcohol can cause white spots or cracks over time.

Post-Curing

The curing time of the printed model is proportional to the size of the part and inversely proportional to the optical power of the curing device. On average, exposure time ranges between 15 and 30 minutes. Remember to use fresh air to dry the parts after post-curing.

You can place your parts in water during post-curing to reduce deformation, especially for figurines and jewelry.

Precautions

Shake well before use and wear a mask and gloves when handling. This product is not intended for oral consumption. Keep out of reach of children.

Avoid contact with eyes. In case of accidental contact, rinse immediately with plenty of water. Otherwise, seek medical advice promptly.

It is recommended to store the resin at a temperature between 15°C and 35°C. Lower storage temperatures increase resin viscosity. The bottle must be sealed and protected from dust and moisture, which can affect print quality. Keep the resin away from sunlight, as UV light can prematurely cure the photosensitive resin.